Canadian Parking Equipment Ltd.
American Parking Equipment Inc.

      
 

RB-10 Mechanical Road Blocker

Download Data Sheet (pdf)

   
   

 

Light model rising blocker to be installed directly onto the road surface, without pit or special infrastructure.  Specially designed to control access of existing high security parking areas. 

 

DESCRIPTION

  • Folded and welded steel housing, 2mm thick.
  • Upper hood with security lock
  • Lateral door for access to internal mechanism with security lock
  • Electromechanical assembly comprising:
    • 120V motor
    • Life-lubricated speed reduction gearbox with worm screw
    • Gearbox driven by pulleys and V-belt
    • Balance achieved by built-in traction springs
    • Obstacle driven by sprocket-wheels and roller chain
    • Limit switches activated by adjustable cams
    • Adjustable safety friction clutch regulated by Ferodo disks
  • Obstacle made of heavy-gauge goffered steel sheet welded on a strong steel profile frame
  • Step skirt made up of 1.5mm-thick telescopic steel sheets, white enameled with red reflecting stripes
  • Driving shaft on pillow blocks with crankshaft/rod device ensuring smooth operation and mechanical locking of step when in upper position
  • Control logic type D1 for control by3-push button box(open - close -stop),  
  • Frame to be fixed on the road surface by means of rawl bolts.
  • Difference of level must be compensated by two concrete slopes (to be provided by customer).
  • Red/green traffic light mounted on cabinet.
  • Emergency crank for manual operation in case of power failure. 

OPTIONS AVAILABLE

  • Automatic closing logic type B3
  • Logic for two-way automatic closing and one-way automatic opening, type C3
  • Vehicle presence detector(s) with detection loop(s), card reader(s), coin acceptor(s), etc.
  • Additional 3-push button box
  • Additional two-colour traffic light for bi directional traffic
  • Goffered steel sheet slopes welded on steel profile frame
  • Security lock for crank hole 

WORK NOT INCLUDED

  • Concrete slopes before and after obstacle
  • 120V Power supply.
  • Power supply and connection wiring. 

TECHNICAL CHARACTERISTICS

  • Height of raised obstacle: 350mm
  • Length of obstacle: 2040-2980mm\6.5-10ft.
  • Motor: 3-phase asynchronous type, 0.25kW 950rpm
  • Power supply: 120V
  • Frequency: 50/60Hz
  • Reduction gearbox: worm-screw type, life-lubricated,
  • ratio of reduction 64:1
  • Power consumption: in stand-by mode 120W
  • in operation 420W
  • Operational temperature: -25 C to +70 C
  • Mechanical endurance (MCBF): 1.106 cycles
  • Net weight: model 1 = 280kg
  • model 2 = 340kg
  • Operation speed: 3 seconds

 

 

    
  Home Revenue Control Gates & Barriers